Mercury Outboards Dealers

The engine you have bought is mercury outboards dealers parts and also you have rib. The steering system, is it the right rating for the hoop of the engine you are putting on? Needs to be checked first, Light obligation navigating systems will only cope with outboards so in this outbreak you will desire a heavy obligation steering system for your boat.  No outboards for sale have a steering system included apart from mercury engines mariner outboards come with the steering bracket and the steering link bar which come prepared with a hydraulic steering system.

You prefer to get your motor on a hoist behind the boat and push the steering cable through the tilt tube on the engine, once you are comfortable that your new ribs steering system is good (you do this first because some boats will not have the approval to push it through after the engine is mounted). This is said to be always correct when, next mount your engine to the boat, ideally you need an offset to counteract the propeller torque they enter the engine for our marine engineering Auckland that's on the port side and then add feet.

Route your cables and wiring, fit the cables into the remote control box and mount the box to the console, and fit it to the engine cable is the same, it should just slip over the turret the union on the control cable should be adjusted so there is no bias towards forward or invalidate. With around 3-5lb of force, for the throttle, you should have the cable pushing the throttle linkage onto the tick-over stop.

For more info:-  https://www.easternmarine.co.nz/